Functions and Options |
Type/Suffix |
Terminal for external Reset |
YR |
Terminal for external Reset, no reset knob on the front panel |
YRE |
Terminal for outgoing reset signal |
RS |
Terminal for external Test |
YT |
Terminal for external Test, no test knob on the front panel |
YTE |
Blocked test and reset at active alarm signal |
SR |
Test function without activation of alarm relay |
TL |
Automatic reset of output relay when alarm signal disappears |
AR |
Protection hubs for LEDīs |
BA |
Housing for Alarm or Indicator Units, 125x125x125 mm, ABS-plastic |
KL
|
Uninterruptible Power Supply |
UPS
|
|
Alarm relay, normally closed, opens at failure |
VS |
Protection against splashing water, IP54 |
SU |
Internal transformer for 110 or 230 VAC, 50-60 Hz power supply |
N |
Adapter for 48 - 60 VDC power supply |
LS6 |
Adapter for 110 VDC power supply |
LS10 |
Embedded adapter for 48 - 110 VDC power supply |
L |
Embedded adapter for 110 or 230 VDC power supply |
MA |
Potential free relay output for each channel for signal to PC, closing |
CR |
Potential free relay output for each channel for signal to PC, breaking |
CRB |
Potential free solid state output for each channel for signal to PC
| CS |
Unit for alarm time delay- one channel, 1 to 35 sec |
TK3
|
|